LOAD Banks
Banking on its experience and expertise, our organization offers a new range of Load Banks that finds its extensive usage in electrical and electronics industry. The offered banks are fabricated using the top quality raw material, which is procured from specialized vendors of the industry. Manufactured under the supervision of our expert team in compliance with industry standards, these products are offered in various technical specifications to meet and exceed the requirements of the clients.
Our Products
DC Resistive Load Bank
K-PAS resistive load is a consignment that contains no inductance or capacitance with pure resistance. K-PAS resistive load can also be defined as a non reactive load, which does not react easily with other metals and defined as a self-contained, unitized, systematic device that includes load elements with control and accessory devices are inbuilt for operation.
K-PAS resistive load bank is created by the conversion of electrical energy to heat via high- power resistors such as grid resistors. This heat must be dissipated from the load bank, by air, by forced means or convection.
K-PAS Resistive loads, a resistive load simulates real-life resistive loads, such as incandescent lighting and heating loads as well as the resistive or unity power factor component of magnetic (motors, transformers) loads.
K-PAS uses high quality nicrome load resistor wires with fan cooling, portable and moved from generator to generator for test purposes.
K-PAS resistive load bank provides equivalent loading for both generators and prime movers.
| 230V 1 PHASE | 50 K WATTS |
| 415 V 3 PHASE | 250 K WATTS |
| DC 6- 300 V | 100 K WATTS |
| ACCURACY | 5% |
| LOAD | 0 – 100% |
DC Electronic Load Bank
K-PAS DC Electronic Load unit is designed to load at Constant Current which can be adjustable 0 to 1.5Amps maximum, DC Electronic Load created through set of Resistors with bank of Transistors and control by an Electronic Circuit.
| Voltage Range | 6V/12V/24V/48V/120V/240V batteries upto 1800Amps |
| Discharging Mode | Constant Current |
| Metering | 3 digit DPM |
| Meter Accuracy | ±3 counts. |
| Constant Voltage Mode | 1. Line: ±0.1% ±2mV for ±10% change in line output 2. Load: ±0.1% ±2mV for load change from Zero to full load |
| Constant Current Mode: Over Load Protection | 1. Line: 0.1% for ±10% line change. 2. Load: 0.1% for change in output voltage from 0 Volts to maximum output voltage. 3. Ripple & Noise: 0.1% rms |
| Overload Protection | Automatic overloads and short circuit protection. |
| Transient Response | Within one second of set output voltage for load change from 10% to 90% |
| Stability | Total drift within 8 hours, after warm up. Less than 0.5% in constant voltage/current mode with constant line, load and ambient temperature conditions. |
| Operating Temperature | AC Upto Ambient 0-50 ºC |
| AC Power supply | 110V/230V/415V AC 50/60 Hz, ±10% |
Programmable DC Electronic Load Bank
Designed with utmost precision and perfection, our range of Load Banks is highly efficient in delivering output current at a medium-high voltage. Manufactured using superior grade components under the guidance of expert professionals, these custom designed load banks are extensively used for laboratory and manufacturing applications. Programmable DC Load Bank is sed for precise Monitoring and timing of Voltage and Current reading.
| Range | 0.1V – 100 V DC 0.01 A- 1000 A DC |
| Operating Mode | Constant Current /Constant voltage/Constant resistance/constant power |
| Metering | LCD |
| Accuracy | 0.1% ±3 counts. |
| Overload Protection | Automatic overloads and short circuit protection. |
| Operating Temperature | AC Up To Ambient 0-50 ºC |
| AC Power supply | 110V/230V AC 50/60 Hz, ±10% |
| Programmable through touch pad /multi step programs | |
| External/remote control through analog signal as optional facility | |
| RS232 connectivity and control as option | |
AC Resistive Load Bank
Designed with utmost precision and perfection, our range of Load Banks is highly efficient in delivering output current at a medium-high voltage. Manufactured using superior grade components under the guidance of expert professionals, these custom designed load banks are extensively used for laboratory and manufacturing applications.
Programmable DC Load Bank is sed for precise Monitoring and timing of Voltage and Current reading.
| Capacity | MAXIMUM 80 AMPS |
| Input | 415V 3 PHASE |
| TEMP | 45 TO 65 Deg Celcius |
| Operating Mode | Constant Current / Constant voltage / Constant resistance / constant power |
| Overload Protection | Automatic overloads and short circuit protection. |
| Transient Response | Within one second of set output voltage for load change from 10% to 90% |
| Ratings | AC & DC Load Banks are manufactured as per customers requirement in various ratings ranging from 1 KW to 3000 KW. (Optional) High-Temperature Limit Thermostat for resistance elements, Thermal overload for each fan and overflow switches are provided. |