Assembly Stations
Our Products
Bellow Damping Assembly Station
This machine is designed in single station for Bellow Damping. The machine basically consists of the following system integrated.
MACHANICAL:
The Machine consists of a table made up of MS Tube, and L angle which is mounted on the integrated Boot and wheel base. The part locates in a movable fixture.
ELECTRICAL:
This machine consists of ELECTRICAL control Panel With PLC, SMPS, Power and control terminals, The front end panel of the machine is consists of HMI, Push button and indicators.
PNEUMATIC:
The Pneumatic Control of the machine is made by the combination of FRL, Solenoid Valve, and Cylinder.
| DESCRIPTION | SPECIFICATION |
|---|---|
| COMPONENT | Pressure Switch Bellow, Damper |
| MACHINE NAME | BELLOW DAMPING ASSY STATION |
| OVERALL DIMENSIONS | 11506002185(LWH) mm |
| LINE PRESSURE | 4-6 bar |
| GROSS WEIGHT | 150 Kg |
| INPUT SUPPLY | 230V AC Supply |
| LOAD CONNECTED | 150 W |
| CONTROL SUPPLY | +24V DC Supply |
Head Assembly Work Station
K-PAS Assembly / disassembly is used End of line inspection / production station Assembly of camshafts – caps insert and tighten with screws through pneumatic or Hydraulic Prevent heating through cooling components provided.it is also used in Assembly of cylinder liners where Lubricating of the COMPONENTS is necessary for preventing rust and damage. Monitoring of the press process through integrated force/distance monitoring Scada or HMI Display of the results on the screen.
| INPUT VOLTAGE | 230V AC, 50HZ |
| GROSS WEIGHT | <150 kg |
| LINE PRESSURE | 4-6 bar |
| PLC | Mitsubishi |
| HMI | Delta (based on customer requirement) |
Mirror Assembly Check Panel
K-PAS Mirror Assembly Checking Panel is used to check the working condition and all the functions of the Electric Mirror and note the working and not working components
Caulking Press Machine
K-PAS purpose of caulking is to seal joints or cracks from the intrusion of water, air (either hot or cold), dust, pollution, insects and noise.Because silicone is permanently waterproof, flexible, and shrink-/crack-proof, it provides sustained benefits. Acrylic caulk can shrink and crack over time, leaving gaps for air and water to seep through. There are several types of caulk and sealants you can use inside and outside your home: silicone sealant caulk, latex caulk, polyurethane foam and specialty caulks like butyl-rubber caulk. Silicone acts as a water and moisture repellant. Use it: Around sinks, tubs and showers. Production based on customer requirement. Caulking and fullering are used to make tight contact between metal parts. Both are operations used in riveting to ensure complete tightness of parts. caulking is done with the help of a caulking tool which is a blunt chisel and in fullering flat chisel is used.
Pin Hole Testing Machine
Leveraging on our rich industry experience and expertise, we have been able to offer precision engineered range of Pin Hole Testing Machines. Our expertise also enables us in designing the range in varied specifications, depending upon the diverse requirements of the clients. Fabricated using superior quality components, these products are highly acclaimed and appreciated among both
Radiator Clip Assembly Machine
Radial clip assembly machine designed for assembly/insert the radial clip into the block as per customer specifications.This machine is operated by servo motor with pneumatic cylinders with specific position
| OPERATION | Motorized Index |
| CAPACITY | 4 Models |
| POWER INPUT | 415 V AC Three Phase AC 50Hz ±10% |
| RATING | 6 AMPS |
| MOTOR | 415 V 3 Phase 2kw |
| AIR SUPPLY | 6 BAR |
| OPERATING TEMP. | 20 – 45 degrees |